Table of Contents
Advertisement
I
Table 2-1 (Cont)e Main Controls and Indicators (I)
ControJlIndicator
LOCAIlREMOTE
BELT SPEED
RIBBON JOINT
PRINT TEST
I
(See
Table2-1.)
Function
This switch places the printer in the REMOTE state for coma
munication with the system, or the LOCAL state for running
test
programs
that
reside in the printer.
This switch must
be in the OCR position for high-quality printing
(900 lpm). In
all
other cases, it should be
in
the NORMAL posi-
tion. This switch is not effective on the PRU0901 printer.
This indicator is lit when the ribbon weld is passing in front of
the print station. Printing is temporarily inhibited while
this
indicator is lit.
(This
occurs at 6-minute intervals during continuous
operation of the printer.)
The printer
runs the
internal
test
programs when this switch is
in the TEST position and the printer is in the LOCAL state. An
error code is displayed
if
a fault is found.
II (See Table 2-2.)
Figure 2-1 • • Main Control Panel
Controls and Indicators
2 .. 2
5182
CW99-00A
Advertisement
Table of Contents
