Mechanical Controls And Adjustments - Honeywell PRU0901 Manual

Table 2-2. Main Controls and Indicators (II)
ControllIndicator
NORMAL
PRINT ONE LINE
FORWARD SPACE
FORWARD TOP OF PAGE
INVALID LINE
REVERSE REWIND
BACKSPACE
BACKSPACE TOP OF
PAGE
Function
This push-button control releases the printer from the
STANDBY state. Pressing NORMAL followed by START causes
printing to resume.
Note
The NORMAL button must be used to resume
printing after each of the following controls has been
used. (Each of these controls places the printer in the
STANDBY state.)
This push-button control causes the next line of data to be
printed.
This push-button control causes the printing of the message
OPERATOR KILLED THIS REPORT. The software then
proceeds to the next report.
This push-button control causes the printing of the message
FORWARD SPACE T.O.P. The printer advances to the next data
block or top of page.
This push-button control causes the printing of the message
INVALID LINE.
This push-button control causes the printing of the message
OPERATOR RESTARTED THIS REPORT and the report in
progress to be restarted.
This push-button control causes the printing of the BACK-
SPACE message. Printing resumes with the last line printed.
This push-button control causes the printing of the message
BACKSPACE T.O.P. and the reprinting of the report in progress
from the beginning of the current data block or the previous top
of page.
Mechanical Controls and
Adjustments
Several mechanical controls and adjustments are located in the printer
mechanism for the control of printing and paper feeding and for operator
maintenance. These controls and adjustments are shown in Figures 2-2,2-3,
and 2-4 and described in Table 2-3.
Controls and Indicators
2-3 CW99-00