*
4. Position the ribbon around the rollers, close the ink roller assembly ,and secure
it. (See step
2
of Cassette Removal.)
5. Tighten the ribbon by rotating the ribbon drive roller counterclockwise.
60 Remove the ribbon comb and install the ribbon inker. (See Ribbon Inker
Installation.)
Print Belt Removal
Operation
It is assumed that the belt unit is open and that the ribbon cassette assembly
is removed.
1. Install the belt container over the print belt.
2. Release the print belt by rotating the print belt release lever clockwise
(Figure 3-11).
3. Lift the container with the belt at the area indicated by an arrow until the
belt is free from its pulley.
4. Lift the container at the left and remove the container from the printer.
Figure 3·11 .. Releasing the Print Belt
3-10
-5182
CW99-00A