Table of Contents
Advertisement
Section
4
Operator . . . Maintenance
This section describes the regular maintenance procedures. The steps
described below should be followed carefully in order to maintain a good print
quality.
Tools and Materials Required
The following items are needed to carry out all the maintenance procedures:
1.
Vacuum cleaner with straight plastic suction nozzle.
2. Disposable vacuum cleaner bag.
3. Soft brush (part number 76962022-001).
4. Hard brush (part number 76953382-001).
5. General Cleaner (part number 76962020-001).
6. Gloves (part number 76962021-001).
There is also a cleaning kit available (see Appendix B for ordering informa-
tion) which comprises:
1 soft brush
1 hard brush
100 General Cleaner packets
10 pairs of gloves
Note
Solvents other than General Cleaner must not be used for
machine and belt cleaning.
.1
Operator Maintenance
4-1
5/82
CW99-00A
Advertisement
Table of Contents
