Anti-slDudge Shield Checking and
Cleaning
See Fig'ure 4-4.
1. Check the anti-smudge shield for wear. The shield must be replaced when
the dimples have worn smooth. (See Appendix B for ordering information.)
2. Using the vacuum cleaner, remove dust in the paper pressers area.
3. Using General Cleaner, remove ink marks and dirt from the Mylar mask,
particularly around the slot.
Figure
4-4.
Anti-smudge Shield Cleaning
Ribbon Cassette Cleaning
See Figure 4-5.
Note
Take care in cleaning the movable ink roller assembly as it is
fragile.
1. Remove the ribbon refill cartridge. (See Ribbon Refill Cartridge
Removal, Section 3.)
Operator Maintenance
4-7
CW99-00