Table of Contents
Advertisement
Introduction
Print Belts
Two identical print belts are supplied with the printer. The customer should
complete and return the belt warranty card that accompanies the printer.
Each print belt comes with a lightweight cartridge to facilitate removal, inter-
change, and storage. The system is programmed to recognize the belt being
used from a code on the belt. (See Appendix B for a list of the available print
belts.)
Ribbons
The printers use a 2-inch-wide, 50-meter-long nylon ribbon having a ribbon
life of 4.5 to 6 million lines.
The ribbon system is composed of a ribbon cassette assembly, ribbon refill
cartridge, and ribbon inker. The operator can maximize print ribbon life by
performing Degree I maintenance (Section 4) and by monitoring the condition
of the ribbon inker's felt wick to ensure the free flow of ink to the transfer
roller. When ribbon replacement is necess8.J.--j', both the ribbon refill cartridge
and the ribbon inker must be replaced. For order information, refer to
Appendix B in this manual; the Honeywell Computer Supplies Catalog, Order
No. BY62; or contact your Honeywell Marketing Representative.
Specifications
Data Format:
Print
positions per line - 136
Characters per inch - 10
Vertical Spacing - 6 or Slines per inch
Reproduction System:
Hammer stroke against flexible belt
~finger"
Programmed
Operations: Print
and space, space only, skip, and vertica1line spacing
Paper Stock:
Width - 4.0 in. (10.2 em)
to
19.0 in. (48.3 em)
Length - 3.0 in. (7.6 em)
to
11.0 in. (27.9 em)
Weight (single-part form) - 15 Ib
to
45 Ib card stock
Multiple copies - 1 original and up
to
5 carbon copies
Printer Physical Characteristics:
Height - 39.4 in. (100.1 em)
Width - 36.3 in. (92.0 em)
Depth - 26.0 in. (66.0 em)
Weight - 375lb (170 kg)
1-3
5182
CW99-OOA
Advertisement
Table of Contents
