Table of Contents
Advertisement
To load Fanfold media from bottom access slot:
About the Ribbon
Thermal transfer printing provides a durable printout that is less vulnerable to
chemicals, heat, and sunlight than direct thermal printing. Select a ribbon type
that matches the media you are using and configure the printer for thermal
transfer media.
The printer supports thermal transfer ribbon rolls with the ink-coated side facing
either inward or outward. To determine which type of ribbon you have, place the
ribbon on a piece of paper as shown, and use a pen or other sharp object to scratch
the ribbon. If you see a mark on the paper, your ribbon is wound ink out.
Load Ribbon
1.
2.
3.
PX940 User Guide
Open the media cover.
Turn the printhead lift lever counterclockwise to raise the printhead and lift the
front arm.
Slide the ribbon roll onto the ribbon supply hub.
= Ink in
= Ink out
19
Advertisement
Table of Contents
