Table of Contents
Advertisement
Power Stacker Controls
The control panel on the power stacker is shown in Figure 2-5. The controls
are described in Table 2-4.
Table 2-4. Power Stacker Controls
Control
SKIP SPEED
LOWER TABLE
PAPER ADVANCE
Function
This switch should be in the FAST position when operating in
good climatic conditions and using good quality paper.
This switch controls the operation of the paper table motor. In
the MANUAL position, the paper table motor runs until the
lower position is reached. In the AUTO position, the paper table
motor operates to accommodate the printer output.
This push button control starts the stacker paper feed motor.
The motor runs for 6 seconds after the button is pressed. It is
used for paper loading and removal.
Figure
2-5.
Power Stacker Control Panel
Controls and Indicators
2-7
CW99-00
Advertisement
Table of Contents
