Introduction; Sn740 Reset Button - Patton SmartNode 4740 Series User Manual

SmartNode 4740 Series (48–128 Ports) User Manual

Introduction

The RESET button (see
• Reboot the SmartNode device (see section
POWER LED is lit"
• Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section
is lit" on page 100)
• Factory reset, which is followed by a device reboot as indicated by the fast blinking of the power LEDs (see sec-
tion "Resetting the SmartNode device when it is operating and a POWER LED is lit"
Introduction
figure 31 for the SN4141E) is used to do the following:
"Resetting the SmartNode device when it is operating and a
on page 100)
"Resetting the SmartNode device when it is operating and a POWER LED
Figure 31. SN740 RESET button
F • Reset Button Functions
on page 100)
99