Table of Contents
Advertisement
12. Enter the Login Name and Login Password.
13. Enter the Scan File Folder for saving the scanned image.
14. Click Apply.
Setting up an SMB server
To use an SMB server, you need to set up parameters for access to SMB
servers using SyncThru™ Web Service.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > SMB Setup > Server List.
5. Click Add.
6. Select the Index number, from 1 to 20.
7. Enter a name in Alias for the Setup. This name will be displayed on
your machine.
8. Select IP Address or Host Name.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
The default port number is 139.
11. Enter the Share name of the server.
12. Check the box next to Anonymous if you want to permit unauthorized
persons to access the SMB server.
This box is unchecked by default.
13. Enter the User Name and User Password.
14. Enter the User Domain.
15. Enter the Scan File Folder for storing the scanned image.
16. Click Apply.
Scanning and sending to SMB/FTP server
1. Make sure that your machine is connected to a network.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass..
3. Press Scan/Email on the control panel.
4. Press the up/down arrow to highlight Scan To SMB or Scan To FTP,
and press OK.
5. Press the up/down arrow until the server you want highlights and press
OK.
6. Press the up/down arrow until the scan format you want highlights and
press OK.
The machine begins scanning and then sends the scanned image to the
specified server.
SETTING AUTHENTICATION FOR AUTHORIZED
USER
If you have connected your machine to a network and set up the network
parameters correctly, you can scan and send images over the network.
To send a scanned image through email or via network server safely, you
must register account information of authorized users to your local machine
using SyncThru™ Web Service.
•
If user authentication has been activated, only authorized local users
can send scanned data to the network (email, FTP, SMB).
•
For network scanning using the authentication feature, you must register
the network or local authentication configuration using the SyncThru™
Web Service.
•
User authentication has 2 options: No Authentication (Default) and
Require Local Authentication.
Registering local authorized users
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings
5. Select Require Local Authentication in the Setup section.
If you have not set Default[From:] Address in SMTP Client
Setup, the notifying pop-up window appears. Click OK to browse
the Web page where you can set the default email address.
6. Click Apply.
7. Click OK in the modifying confirmation pop-up window.
8. Select Local Authentication in the left pane.
9. Click Add.
10. Select an index number corresponding to the location for storing the
entry, from 1 to 50.
11. Enter User Name, Auth ID, Password, E-mail Address and Phone
number.
You need to enter the registered user ID and password in the machine
when you start scanning to email from the control panel.
12. Click Apply.
USING SAMSUNG SCAN MANAGER
If you have installed the printer driver, Samsung Scan Manager program
has installed too. Start Samsung Scan Manager program to find out about
this program information and the installed scan driver's condition. Through
this program, you can change scan settings and add or delete the folders
where scanned documents are saved in your computer.
The Samsung Scan Manager program can only be used in the
Window and Macintosh system. If you use the Macintosh, See
"Setting scan information in Scan Manager" on page 79.
1. From the Start menu, click Control Panel > Samsung Scan Manager.
You can open Samsung Scan Manager by right clicking the Smart
Panel icon in the Windows task bar and seleting Scan Manager.
2. Select the appropriate machine from the Samsung Scan Manager
window.
3. Press Properties.
4. The Set Scan Button tab allows you to change the saving destination
and scan settings, add or delete application program, and format files.
You can change the scanning machine by using the Change Port tab.
(Local or Network)
5. When setting is done, press OK.
Scanning_ 76
User Authentication.
Advertisement
Table of Contents
