Huawei UPS5000-E Series User Manual page 85

UPS5000-E-(20 kVA-160 kVA)
User Manual (Low voltage)
Step 3 Connect ground cables, as shown in
Figure 3-43 Grounding
Step 4 Route power cables.

Issue 03 (2020-04-27)
 The quantity of holes in the above figure is for reference only.
 If holes are drilled for routing cables, attach grommet strips to the hole edges to protect cables.
 : Internal equipotential connection
 : Protection ground
Dual mains
Remove the copper bars between the mains and bypass input terminals, as shown in
Figure 3-44.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-43.
3 Installation
77