Huawei UPS5000-E Series User Manual page 59

UPS5000-E-(20 kVA-160 kVA)
User Manual (Low voltage)
Step 3 Move the cabinet over its castors to the installation position.
Step 4 (Optional) If the castors of the UPS need to be lifted from the ground, perform steps
Step 2
Step 5 Remove the rear panel of the cabinet, and then open the front door.
Figure 3-10 Removing the rear panel
Step 6 Remove the four plugs from the bottom of the cabinet (two at the front and two at the rear).
Issue 03 (2020-04-27)
in Unsecured Installation.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Step 1 to
51