Install The Accuboom Harness Cable - Raven AccuBoom Installation Manual

Chapter 3

Install the AccuBoom Harness Cable

Deutsch Connectors on the Chassis Harness
FIGURE 2.
Locate the 12-pin Deutsch connectors labeled CD04 and CD05 connected together on the chassis harness
1.
cable.
Disconnect the connectors.
2.
AccuBoom Harness Connected to the Machine's Harness
FIGURE 3.
Install the Miller Condor G-series CAN AccuBoom cable (P/N 115-1001-042) between the CD04 and CD05
3.
connectors.
8 Miller Condor G-Series AccuBoom Installation Manual