Recommendations; Tools Needed; Preparing For Installation; Point Of Reference - Raven AccuBoom Installation Manual

Chapter 2

Recommendations

Raven Industries recommends the following best practices when installing the AccuBoom system.
•
Use part numbers to identify the parts.
•
Do not remove the plastic wrap from a part until it is necessary for installation.

Tools Needed

The following tools are recommended for installation of the AccuBoom system:
•
SAE standard-sized wrenches
•
Cable ties
•
Set of tools

Preparing for Installation

Before installing AccuBoom, park the machine where the ground is level, clean, and dry. Leave the machine
turned off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.

Point of Reference

The instructions in this manual assume that you are standing behind the machine, looking toward the cab.
4 Miller Condor G-Series AccuBoom Installation Manual