Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Raven Manuals
  4. Accessories
  5. AccuBoom
  6. Installation manual

Raven AccuBoom Installation Manual

Automatic on-off control for up to 10 sections
Hide thumbs Also See for AccuBoom:

Advertisement

Quick Links

Download this manual
AccuBoom™ Installation Manual
GVM Predator and Prowler ('08 & Older)

Advertisement

loading

Related Manuals for Raven AccuBoom

Summary of Contents for Raven AccuBoom

  • Page 1 AccuBoom™ Installation Manual GVM Predator and Prowler (’08 & Older)

  • Page 3: Components Needed

    AccuBoom system. See the Viper Installation and Operators Manual for instructions on setting up the software and using the AccuBoom system. You will also need a valid AccuBoom Control Activation Key for your Viper system in order to activate the AccuBoom system.
  • Page 4 GVM Predator and Prowler ('08 & Older) CAN AccuBoom Installation Manual Notes:...
  • Page 5 Remove the rectangular cover located on the back of the machine at the center of the booms. This cover protects the hydraulic valves. b. Drill three holes in the side of the cover and mount the Raven CAN AccuBoom node (P/N 063-0172-316) on the inside of the cover.
  • Page 6 Unplug the 4 pin boom cable for boom valve 1. c. Tee in the boom connectors labeled boom 1 on the Raven AccuBoom cable (P/N 115-0171-591). d. Repeat for each of the other remaining boom valves.
  • Page 7 Manual # 016-0171-014 4. Fasten the AccuBoom cable (P/N 115-0171-591) with a loop as shown in the picture, so that no rainwater can enter the cable. Loop...
  • Page 8 GVM Predator and Prowler ('08 & Older) CAN AccuBoom Installation Manual 5. Route the CAN and power cables form the AccuBoom node to the cab: a. Locate the CAN terminator behind the right corner of the machine cab. b. Remove the CAN terminator (P/N 063-0172-369) from the CAN cable.
  • Page 9 RO U B L E S H O O T I N G The CAN AccuBoom node (P/N 063-0172-316) has additional features to allow the user to diagnose the AccuBoom system. The CAN AccuBoom node has a plastic window in the case that allows the user to view green diagnostic lights.

  • Page 11: Limited Warranty

    How Can I Get Service? Bring the defective part and proof of purchase to your Raven Dealer. If your Dealer agrees with the warranty claim, the Dealer will send the part and proof of purchase to their distributor or to Raven Industries for final approval.
  • Page 12 P.O. Box 5107 Fax: 605-331-0426 Sioux Falls, SD 57117-5107 www.ravenprecision.com atdinfo@ravenind.com Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries, Inc. All rights reserved under copyright laws.