Important Safety Information - Raven AccuBoom Installation Manual

CHAPTER
1

Important Safety Information

Read this manual and the operation and safety instructions included with your implement and/or controller
carefully before installing the AccuBoom™ system.
•
Follow all safety information presented within this manual.
•
If you require assistance with any portion of the installation or service of your Raven equipment, contact
your local Raven dealer for support.
•
Follow all safety labels affixed to the AccuBoom system components. Be sure to keep safety labels in good
condition and replace any missing or damaged labels. To obtain replacements for missing or damaged
safety labels, contact your local Raven dealer.
When operating the machine after installing AccuBoom, observe the following safety measures:
•
Be alert and aware of surroundings.
•
Do not operate AccuBoom or any agricultural equipment while under the influence of alcohol or an illegal
substance.
•
Remain in the operator's position in the machine at all times when AccuBoom is enabled.
•
Disable AccuBoom when exiting from the operator's seat and machine.
•
Do not drive the machine with AccuBoom enabled on any public road.
•
Determine and remain a safe working distance from other individuals. The operator is responsible for
disabling AccuBoom when the safe working distance has been diminished.
•
Ensure AccuBoom is disabled prior to starting any maintenance work on AccuBoom or the machine.
•
Always verify that the power leads are connected to the correct polarity as marked. Reversing the power
leads could cause severe damage to the equipment.
•
Ensure that the power cable is the last cable to be connected.
Manual No. 016-1001-076
I mportant Safety
C h a p t e r 1
Information
NOTICE
CAUTION
1