Comau Robotics C5G Instruction Handbook Manual page 45

HS-RC-C5E-TIN_04.fm
00/0310
Operating procedure (Continua)
c. Fit the movable connector (A)
and tighten the ring nut firmly.
d. Place the terminal on the
supporting surface (B) on the
door.
e. Wind the cable tidily on the
special support.
Act carefully
closing the door to
avoid damaging
cable:
make sure the cable is not stuck
between the feet and the door or
the rising socket and the door.
Flow-up procedure
– Not necessary.
while
the
Teach Pendant: connection
45