Table of Contents
Advertisement
English
With pq, select the timer you wish to set or change and press YELLOW or OK to edit it.
The timer setting menu will now be displayed.
Use pq to select required parameter.
Use u to edit the selected parameter. Use OK to confirm changes.
The following settings are available:
Use the 0-9 buttons to enter the date for the timed event
Date:
Programme Name:
Press u to access the channel list, use p/q to select a channel and press OK to
confirm. The name of this channel will appear in the options line
Use the 0-9 buttons to enter the time to start the timed event
Start Time:
End Time:
Optional field to define the ending time for timed event
Duration:
Optional field for Recorded type to define the duration of timed event
Mode:
Choose between Once, Daily (the timer will be executed every day, same time) or
Weekly (the timer will be executed every week, same day, same time) and Monthly (the
timer will be executed every month, same day, same time).
Type:
Choose between Channel (the timer will switch to the selected channel), On (the timer
will wake up the receiver), Standby (the timer will turn the receiver into standby mode)
or Recorder (the timer will start recording the scheduled event)
AD Record:
Optional field for Recorded type to define will Audio description be recorded for timed
event
Subtitle Record:
Optional field for Recorded type to define will subtitles be recorded for timed event
Teletext Record:
Optional field for Recorded type to define will teletext be recorded for timed event.
When all settings have been made, press OK to set timer.
To quit the timer without saving your settings, press EXIT.
Use GREEN (Delete) to delete selected timer.
Use RED (Delete All) to delete all defined timers.
A confirmation banner will be displayed. Select Yes to confirm deletion or No to discard.
7.4.2 Child lock
This sub-menu allows you to protect the installation menu, some settings and/or access to some
channel preview with PIN-code.
In this sub-menu you can also define new PIN-code.
You will be asked to enter your PIN code. (DEFAULT PIN: 0000)
Use pq to select Optional required parameter.
Use OK or u to change Optional selected parameter. Use OK to confirm changes.
System Lock:
Locks the installation menu. You can set it to On or Off.
Parental Rating: Choose between: Off, 4 and up to 18 of age. Channels with a parental rating above the
chosen age will be protected with PIN code (if defined in your local broadcast)
Change Pin Code: To set or change the PIN code. You will be asked to enter your current PIN-code (or, if
it was not changed, enter default PIN code 0000), then enter your new PIN code and
confirm it with re-enter it again. Once it is confirmed, a confirmation pop-up window
will appear to tell you that it has been saved successfully. Then your old PIN code will
be replaced with your new PIN code.
19
Advertisement
Table of Contents
