Velocity storage
It allows user to store 4 new Velocities as custom and use it in future
measurement. User can get the custom velocities by the features of
Velocity input or Velocity measurement.
The following steps outline how to enable and set up this feature:
1) Press the
2) Use
Velocity storage is highlighted. Press the
3) Press
4) Press
to exit and DC‐5000 is now ready to perform measurements.
8.2.2 Resolution
User can select the displayed resolution. When 0.01mm or 0.001 inch be
selected, the workpiece surface to be measured should be smooth for the
purpose of getting an accurate value.
The following pages outline how to enable and set up this feature:
1) Press the
2) Use
Resolution is highlighted. Press the
3) Press
4 ) Press the
measurements.
key to illuminate SET‐VELOCITY RATE
keys to scroll through the sub menu items until
key to illuminate the target velocity, Press
key to illuminate SET.
keys to scroll through the sub menu items until
key to select resolution and unit. Press
key to exit setting and DC‐5000 is now ready to perform
key to confirm.
key to confirm.
‐ 19 ‐
to confim.
to confirm.