Table of Contents
Advertisement
custom setting locations.
8.2.9 B‐SCAN display range
It's important to note that the measurement range of B‐scan on the display
be set wide enough, so that the Maximum thickness of the material can be
viewed on the display.
The following steps outline how to set the B‐SCAN DISPLAY RANGE.
1) Press the
key to illuminate SET
2) Use
keys to scroll through the sub menu items until B‐SCAN
DISPLAY RANGE is highlighted. Press the
3) Press
numbers, Press
4) Press
again to return to the measurement screen. Then Press
twice go to B‐SCAN interface.
8.3 MEM.
The gauge has a memory capacity of 10,000 measurements in 100 files. The
current memory location will be displayed on the screen as F000‐000 in both
A‐scan and DIGIS mode. The files are numbered from 1‐100, and
measurement number will be followed automatically from 001.
This feature allows user to complete following function:
to move the cursor, press
to confirm.
key to confirm.
or
‐ 26 ‐
to change
Advertisement
Table of Contents
