Materials
The DC‐5000 presets 9 common materials' sound velocity. They are:
aluminum, titanium, steel, stainless steel, glass, copper, cast iron, brass,
polystyrene.
The user may opt to choose such basic material type from the menu. It's
important to note that these velocities will not always be an exact
representation of the material being tested. Use these values only if a close
approximation is acceptable.
The following pages outline how to enable and set up this feature:
1) Press the
2) Use
The target material is highlighted. Press the
3) Press the
measurements.
key to illuminate SET‐Velocity rate‐Materials,
keys to scroll through the sub menu items until
key to exit setting and DC‐5000 is now ready to perform
‐ 16 ‐
key to confirm.