Table of Contents
Advertisement
8.4.4 Default
During the usage, when User can not ensure why the problems comes out
and with some questions on setting, he can use this function to make the
parameters to restore the factory status to eliminate any abnormal because
of the parameters setting.
8.4.5 Information
The screen displays the Transducer Number.
9. Measuring technology
9.1 Measuring methods
The unit provides many measuring methods.
1). Single point measuring method:
Use the probe to measure any point Of the workpiece to be measured
and the displayed value is the thickness.
2). Two point measuring method:
Perform two measurements on the same point of the measured
Surface. In the second measurement, splitting plane of the probe
should be 90 degree, take the minimum as the thickness value.
3). Multiple point measurement method:
Perform several measurements In a circle about 30mm in diameter
and take the minimum value as the thickness value.
4. Continuous measurement methods:
‐ 30 ‐
Advertisement
Table of Contents
