5. Keypad Functions
On & Off Key
Function 1 It is used to power the unit either ON or OFF.
Function 2 Pressing this key to escape the menu setting and return
back to the main measurement screen.
Menu Key
Function 1 It is used to enter the menu and confirm the selection.
Function 2 It is as a shortcut key in A‐scan mode. After finish one
A‐scan measurement (keeping the Parameters field in
highlight), press this key to store the current set‐up
parameters into the CUSTOM SETTING.
F1 Key
Function 1 In A‐scan manual mode, it is a toggle button mainly
used to set up the parameters RANGE, GAIN, DELAY,
GATE, BLANK by adjusting the key
Function 2 In B‐scan mode, press this key to clear current gragh
And ready for next measurement.
F2 Key
Function 1 Press this key to toggle between display view options‐
A‐Scan, B‐SCAN and DIGITS.
Function 2 In A‐scan mode, press this key to save current custom
setup that has been modified or created by the user.
‐ 3 ‐
.