Average Mode - DGC DC-5000 Instruction Manual

Average mode:
With this function, DC‐5000 displays the average value of 2 to 9 measured
points. It can help user to check the surface planeness of flat board and
their manufacturing process.
The following pages outline how to enable and set up this feature:
1) Press the
2) Use
Average is highlighted. Press the
shows as follows:
3) Press the
4) Press the
5) Press the
measurements.
key to illuminate MEA.
keys to scroll through the sub menu items until
or key to change the numbers among 2 to 9,
key to confirm.
key to exit setting and DC‐5000 is now ready to perform
key to confirm. The Display
‐ 13 ‐