8.3.1 Set a new file
The following steps outline how to set a new memory file.
1) Press the
key to illuminate MEM.
2) Use
keys to scroll through the sub menu items until set a new
File Is highlighted. Press the
3) Press
or
Number (001‐100 can be set), Press
4) Press
to return to the measurement screen.
NOTE: After taking every measurement, press
with a location number.
8.3.2 Memory Read
It is sometimes necessary to go back and view the stored readings. The
following procedures outline how to read memory.
1) Press the
key to illuminate MEM.
2) Use
keys to scroll through the sub menu items until Memory
read is highlighted. Press the
3) Press
Number. Press
Displayed. And press
to move the cursor, Press
to move the cursor, Press
to confirm. All stored readings in this file will be
or
key to confirm.
to confirm.
key to store this reading
key to confirm.
to page forward or backward.
‐ 27 ‐
or
set the file
to set the target File