Standard Measurement:
With this function, DC‐5000 displays the current measurement value,
satisfied with the normal measuring needs.
The following pages outline how to enable and set up this feature.
1) Press the
2) Use
Standard is highlighted. Press the
3) Press the
measurements.
Minimum Measurement:
When taking measurements, DC‐5000 displays the smallest thickness
reading it found. It is suitable for testing the curvature surface or needs to
get the minimum value which is widely used in the measurement of
pipeline.
Notice: it is not recommended to use this function when measuring cast iron
or alloy materials.
The following pages outline how to enable and set up this feature.
1) Press the
2) Use
Minimum is highlighted. Press the
3) Press the
measurements.
key to illuminate MEA.
keys to scroll through the sub menu items until
key to exit setting and DC‐5000 is now ready to perform
key to illuminate MEA.
keys to scroll through the sub menu items until
key to exit setting and DC‐5000 is now ready to perform
S1025
key to confirm.
key to confirm.
‐ 11 ‐