2) Use
keys to scroll through the sub menu items until
RECTIFICATION is highlighted. Press the
3) Press
4) Press
to confirm and return to the measurement screen and bigan
taking readings.
RF+ HALF+
8.2.8 A‐SCAN custom setting
DC‐5000 can store 4 A‐SCAN custom settings. This feature saves a great deal
of time and knowledge for future inspection of the same job or project. Also
it eliminates error between two or more users during the setup and
calibration process.
The following steps outline how to open/store an A‐SCAN CUSTOM SETTING.
Opening a custom setting.
1) Press the
2) Use
keys to scroll through the sub menu items until A‐SCAN
CUSTOM SETTING is highlighted. Press the
3) Press
4) Press
to confirm and return to the measurement screen and
Began taking readings.
Store a custom setting
Once the DC‐5000 parameters and features have be adjusted for an
application, the user can Press
key to select RF+ or HALF+,
key to illuminate SET
key to select target setting.
key to confirm.
key to confirm.
to save this setting to any one of 4
‐ 25 ‐