Velocity input
If the material velocity is known, the user may wish to simply enter the
velocity number into the DC‐5000, rather than have the DC‐5000 calculate
the velocity value on using a know thickness. And DC‐5000 also can store 4
new velocities as custom.
The following pages outline how to enter the velocity:
1) Press the
2) Use
VELOCITY INPUT is highlighted. Press the
3) Press the
Key to change the numbers,
4) Press the
5) Press the
Press the
6) Press the
measurements.
key to illuminate SET‐Velocity rate,
keys to scroll through the sub menu items until
or
key to move the cursor, Press the
key to confirm and store it into Velocity Storage,
or
key to Illuminate the place where want to store,
key to confirm.
key to exit setting and DC‐5000 is now ready to perform
key to confirm.
‐ 17 ‐
or