Velocity Storage; Resolution; Probe Calibration - DGC DC-2000C Series Instruction Manual

DC-2000C SERIES ULTRASONIC THICKNESS GAUGE
velocity, press
- Press
This new velocity will be stored. And it can be found from
rate"- "⑷Vel. Storage"

8.4.2.4 Velocity Storage

DC-2000 series provides 4 locations to store new velocities.
〖8.4.3〗 Resolution
- Press
- Press
1. 0.1 mm
2. 0.01 mm
3. 0.01 in
4. 0.001 in
- Press
〖8.4.4〗 Probe Calibration
It will cause error during the primary stage of usage and operating. If this
caused by the probe itself, please use following calibration method:
- Measure the test piece with known thickness.
- Press
- Press
to select one, press
to Esc. Menu and into the measurment.
key into "Resolution"
or to set resolution and unit.
key to enter/confirm

"4.Probe calibration"

into
into "Calibration"
or
for further use.
11
to confirm.
"2. Velocity