Nortel Communication Server 1000 Manual page 74

74 Virtual Network Services in the UK with DASS2/DPNSS1 Bearers
Table 34
LD 16 Set up the VNS Bearer Trunk. The Bearer trunk must be associated with each node and
customer (both ends of the Bearer link must be configured). (cont'd.)
Prompt Response
0-511
ROUT
0-127
CNTL YES
TIMR VSS (0)
VSS (1)
VSS (2-1023)
TIMR VGD 0-(6)-31
VRAT (NO)YES
Table 35
LD 86 Configure the VNS trunk route.
Prompt Response
REQ NEW CHG
CUST xx
FEAT RLB
RLI 0-MXRL
ENTR 0-63
0-511
ROUT
0-127
VNS YES
Description
Route number
Range for Large System and CS 1000E system.
Range for CS 1000M Small System, Meridian 1 Small System,
CS 1000S system, Media Gateway 1000B, and Media Gateway
1000T.
Change controls or timers.
0 = Do not answer the Bearer channel until the terminating
party answers.
1 = Answer the Bearer channel immediately on arrival.
2-1023 = Answer the Bearer Channel after specified seconds
(rounded down to multiple of two seconds) if the terminating
party has not already answered.
Enter the guard timer on the associated VNS DN (the time
allowed for the Bearer trunk call to disconnect, in seconds)
(Do not) immediately answer the attendant extended VNS call
on the incoming Bearer trunk.
Description
Add, or change data.
Customer number as defined in LD 15.
Route list data block feature.
The Route List Index to be associated with the VNS Bearer
Channel.
The entry within the Route List Index to be associated with the
VNS Bearer Channel.
Route number
Range for Large System and CS 1000E system.
Range for CS 1000M Small System, Meridian 1 Small System,
CS 1000S system, Media Gateway 1000B, and Media Gateway
1000T.
Virtual Network Services.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.