How To Upload A Custom Logo; Establishing An Ssl Vpn Connection; Figure 241 Example Logo Graphic Display - ZyXEL Communications ZyWALL USG 300 User Manual

Unified security gateway

Hide thumbs Also See for ZyWALL USG 300:

Table of Contents

Chapter 22 SSL VPN

22.4.1 How to Upload a Custom Logo

Follow the steps below to upload a custom logo to display on the remote user SSL VPN

1 Click VPN > SSL VPN and click the Global Setting tab to display the configuration

2 Click Browse to locate the logo graphic. Make sure the file is in GIF, JPG, or PNG

3 Click Apply to start the file transfer process.

4 Log in as a user to verify that the new logo displays properly.

The following shows an example logo on the remote user screen.

After you have configured the SSL VPN settings on the ZyWALL, follow the steps below to

establish an SSL VPN connection.

1 Display the login screen and enter your user account information (the user name and

2 Select Login to SSL VPN.

3 Click Login.

4 SSL VPN connection starts. This may take several minutes depending on your network

connection. Once the connection is up, you should see the client portal screen. The

following shows an example.

ZyWALL USG 300 User's Guide