Christie HAL Series User Manual page 16

The Composite Video and S-Video inputs provide simultaneous connection of a
composite video source (
For each video input, use the corresponding audio input/output as shown.

If you have a composite video source, connect it to the projector's rear input
panel using the extreme left composite BNC connector labeled
2-15.
Figure 2-15. Connecting a Composite Video Source
To control audio levels in an audio/visual system, connect pre-
amplified (line level) audio inputs to the left and right audio inputs labeled
Then connect the audio outputs (
equipment. All audio connection cables require standard RCA-type plugs.

If you want to connect an extra composite video source, connect to
the green BNC connector (labeled " ") and use
Figure 2-16. Connecting an Extra Composite Video Source
INSTALLATION & SETUP
) and an S-Video source (
) to external audio amplification
DLV 1280
) to the projector.
. See Figure
.
using
. See Figure 2-16.
2-13
User's Manual