Table of Contents
Advertisement
The Composite/S-Video Input Module may be installed in a Marquee signal
switcher or a Marquee Case/Power Supply and used with DLV 1280. The
module receives composite video or S-video input signals from tape or disk
players. Video inputs are 75
buffered loop-through to another display device.
◊
BNC connectors for composite RGB signals
◊
4-pin mini-DIN connectors for S-Video signals
◊
RCA connectors for left and right channel audio inputs
◊
buffered loop-through video outputs
NOTE: This interface is not a decoder. Proper display of NTSC, PAL, OR
SECAM signals requires that the DLV 1280 includes a multistandard decoder
(optional on overseas export model).
The HDTV Input Module may be installed in a Marquee signal switcher or
Marquee Case/Power Supply and used with DLV 1280. The module receives
HDTV analog RGB input signals with tri-level sync.
◊
accepts RGB video with tri-level composite sync
◊
BNC connectors for RGB signal inputs
◊
RCA connectors for left and right channel audio inputs
The PC Analog Input Module may be installed in a Marquee signal switcher or
Marquee Case/Power Supply and used with DLV 1280. The module receives
analog RGB input signals from IBM PC compatibles or Macintosh computers.
Video inputs are 75
loop-through to another display device such as a monitor.
5
terminated. Video outputs are provided for
5
terminated. Video outputs are provided for buffered active
OPTIONAL INPUT MODULES
DLV 1280
User's Manual
E-3
Advertisement
Table of Contents
