Table of Contents
Advertisement
OPERATION
3-18
DLV 1280
User's Manual
recognizable name for a certain channel (such as "vhs2" or "pc"), lock a channel
from further changes, or include another channel in the channel list menu.
From the Channel Setup menu, highlight the channel you wish to edit or see
further information about. Press
channel.
Figure 3-10. Channel Edit Menu
To enter or edit the channel name (maximum of 8 characters), press
and then:
•
Press
to move to the next letter in the alphabet or a higher number
•
Press
to move to the previous letter in the alphabet or a lower number
•
Press
to move right
•
Press
to move left
•
Press
to insert a space
•
Press
to delete a character or number
•
Press
to accept all when done
•
Press
to cancel (escape). Original text remains.
Remember to press
numbers directly from the keypad.
number (1-99) on the keypad. If the number you enter has already been assigned,
you will be asked if you want to delete the other channel. Select "
the change and retain the other channel number.
This number identifies the switcher to which the source is
connected. The projector is considered to be a switcher and is always identified
as switcher " ", with other switchers identified as 1-9. Edit as necessary.
This number identifies the slot to which the source is connected.
On the projector, these slots are:
•
slot 1 =
•
slot 2 =
•
slot 3 =
•
slot 4 =
to display the Channel Edit menu for this
Highlight and select an editable
parameter here.
after each character or digit you want. You can enter
To change a channel number, press the desired
,)6
" to cancel
Advertisement
Table of Contents
