Christie HAL Series User Manual page 36


Press at any time to access the Main menu. This menu lists all function
menus.
In the Main menu, use the arrow keys to highlight the function menu you wish to
access, then press
scrolling, simply enter the number of the desired menu. For example, enter
(in the Main menu) for Image Settings or
function menu will appear.

Function menus are accessed through the Main menu. They are Auto Setup,
Image Settings, Horizontal Settings, Vertical Settings, Preferences, Channel
Setup, Service, and Status.
Figure 3-6. Sample “Function” menu
bar on the right side), use
If items are locked out or do not pertain to the current action, the highlight will
skip over them and you cannot select them, although they remain in the list. If
there is no signal present all source-dependent adjustments are disabled. Also
note that after 15 minutes of inactivity, a function menu disappears and the
projector returns to presentation level.
When you are finished with a function menu, do one of the following:
•
Press to return to the previous menu level (usually the main menu).
•
Press
Figure 3-5. Using the Main Menu
to display it. Or, for quicker access with less manual
to go the next page and
to accept any changes made and return to the main menu.
OPERATION
for Preferences. The desired
Once in a function
menu (such as
Preferences, left),
use the arrow keys to
move the highlight to
a desired option.
Then press
select it. Or simply
press the appropriate
number key for
quicker access to any
numbered menu item.
If a menu is longer
than a single page
(indicated by the
presence of a scroll
to return to the previous.
DLV 1280
User's Manual
to
3-11