Table of Contents
Advertisement
INSTALLATION & SETUP
2-12
DLV 1280
User's Manual
The RGB input (DAT 1) consists of five BNC type connectors for connection to
a variety of RGB sources. Such sources include VGA, SVGA, SXGA, XGA,
Mac, PowerMac, DEC, Sun, SGI and others. DLV 1280 supports multiple sync
types: sync-on-green for data, composite, and separate H & V (3-,4-, or 5-wire
RGB).
Connect the sync BNC inputs. Then connect the red, green and blue source
outputs to the RED, GREEN, and BLUE inputs on the panel. If the source uses
sync-on-green, you only need to connect the red, green, and blue. If your source
provides a composite sync output, connect it to the H input. If your source
provides separate horizontal and vertical sync outputs, connect horizontal sync to the H
input and connect vertical sync to the V input. See Figure 2-13.
Connect PC analog sources to Dat 2 as shown in Figure 2-14. You may need an
adapter if you are connecting a Mac to Dat 2.
Figure 2-13. Connecting to RGB Inputs
Figure 2-14. Connecting PC Analog Input
Advertisement
Table of Contents
