Figure 344 Menu 25.1: Ip Routing Policy Setup; Table 211 Menu 25.1: Ip Routing Policy Setup - ZyXEL Communications ZyWall 70 User Manual

Internet security appliance
Hide thumbs Also See for ZyWall 70:
Table of Contents

Advertisement

1 Type 25 in the main menu to open Menu 25 - IP Routing Policy Summary.
2 Select Edit in the Select Command field; type the index number of the rule you want to
configure in the Select Rule field and press [ENTER] to open Menu 25.1 - IP Routing
Policy Setup (see the next figure).

Figure 344 Menu 25.1: IP Routing Policy Setup

The following table describes the fields in this screen.

Table 211 Menu 25.1: IP Routing Policy Setup

FIELD
Rule Index
Active
Criteria
IP Protocol
Type of Service
Precedence
Packet Length
Len Comp
Source
addr start / end
Chapter 43 IP Policy Routing
Menu 25.1 - IP Routing Policy Setup
Rule Index= 1
Criteria:
IP Protocol
= 6
Type of Service= Normal
Precedence
= 0
Source:
addr start= 1.1.1.1
port start= 20
Destination:
addr start= 2.2.2.2
port start= 20
Action= Matched
Gateway Type= IP Address
Gateway addr
= 192.168.1.1
Type of Service= Max Thruput
Precedence
= 0
Edit policy to packets received from= No
DESCRIPTION
This is the index number of the routing policy selected in Menu 25 - IP Routing
Policy Summary.
Press [SPACE BAR] and then [ENTER] to select Yes to activate the policy.
Enter a number that represents an IP layer 4 protocol, for example, UDP=17,
TCP=6, ICMP=1 and Don't care=0.
Prioritize incoming network traffic by choosing from Don't Care, Normal, Min
Delay, Max Thruput or Max Reliable.
Precedence value of the incoming packet. Press [SPACE BAR] and then [ENTER]
to select a value from 0 to 7 or Don't Care.
Type the length of incoming packets (in bytes). The operators in the Len Comp
(next field) apply to packets of this length.
Press [SPACE BAR] and then [ENTER] to choose from Equal, Not Equal, Less,
Greater, Less or Equal or Greater or Equal.
Source IP address range from start to end.
Press ENTER to Confirm or ESC to Cancel:
ZyWALL 70 User's Guide
Active= Yes
Packet length= 40
Len Comp= Equal
end= 1.1.1.1
end= 25
end= 2.2.2.5
end= 25
Redirect packet= N/A
Log= No
553

Advertisement

Table of Contents
loading

Table of Contents