Automatic Technology Axess Pro Series Installation Instructions Manual page 22

Transmitter Management
Code Operation (location used)
If the code operation is selected for a location that already
contains a transmitter, then the storing transmitter
code procedure (page 19) will be initiated and the new
transmitter will replace the existing one. Note the button
functions and name of the existing transmitter will be
transferred to the new transmitter. This procedure is of
great convenience when replacing a lost transmitter.
Delete Operation
The delete operation is used to remove a transmitter
from memory along with the name and button function
settings.
Edit Operation
The edit operation displays the transmitter record for
editing purposes. See Transmitter Editing (page 20).
Copy Operation
The copy operation is used to code multiple transmitters with
the same button function as that of the selected transmitter.
Once selected an abbreviated code set routine is initiated
which repeats steps 1 to 3 of the the Storing Transmitter
Code procedure (page 19) for each transmitter to be
coded. Coding is terminated by pressing the STOP button.
Exiting The List
To exit the transmitter list, simply press STOP to return
to the Code menu.
22 Axess® Pro Series 3100 Owner Installation Instructions
MENU 1.2
Delete TX# 14
MENU 1.3
Edit TX# 14
MENU 1.4
Copy TX# 14
fi g 39
fi g 40
fi g 41