9 SHOCK ABSORBER, SWINGARM
9.28
102
H01897-01
Changing the heim joint
B04455-10
B04456-10
B04457-10
Main work
–
Check the top and bottom heim joints.
–
Move the swingarm up and down.
»
If there is detectable play:
–
Change the heim joint. (
Finishing work
–
Remove load from the front of the vehicle.
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the shock absorber. (
Main work
–
Clamp the shock absorber into the vise.
Guideline
Use soft jaws.
–
Remove both collar bushings
cial tool.
Drift (T120) (
p. 372)
–
Press the heim joint against a lock ring using the special tool.
Pressing tool (T1207S) (
–
Remove second lock ring
–
A
Place special tool
underneath and press out heim joint
B
using special tool
.
Pressing tool (T1207S) (
p. 102)
p. 12)
p. 12)
p. 83)
1
of the heim joint with a spe-
p. 373)
2
.
p. 373)
3