Installing Injection Valves; Installing The Kick Starter; Installing The Alternator Cover - KTM 250 EXC TPI 2019 Repair Manual

18 ENGINE

18.6.26 Installing injection valves

18.6.27 Installing the kick starter

18.6.28 Installing the alternator cover

272
–
Position injection valves on both sides.
–
Mount and tighten screws
Guideline
Screw, injection
valve holder
D04404-10
–
Position the kick starter.
–
Mount and tighten screw
Guideline
Screw, kick
starter
D04403-10
–
Mount dowels
D04402-11
1
with insulating washers
M5 5 Nm (3.7 lbf ft)
1
with the washer.
M8 25 Nm (18.4 lbf ft)
1
and put alternator cover gasket
2
.
Loctite ® 243™
Loctite 2701™
®
2
in place.