15 WIRING HARNESS, BATTERY
15.4
160
E00874-10
Disconnecting the negative cable of the battery
R01414-10
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert spare fuse with the correct rating only.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Replace the spare fuse in the fuse box so that it is
available if needed.
–
Check that the power consumer is functioning properly.
–
3
Close the fuse box cover
–
Mount the EFI control unit
Finishing work
–
Mount the seat. (
p. 121)
Preparatory work
(All EXC models)
–
Press and hold the kill switch
until the engine stops.
(All XC‑W models)
–
Press and hold the kill switch
until the engine stops.
–
Remove the seat. (
p. 121)
Main work
–
Disconnect negative cable
p. 317)
p. 317)
.
1
2
on the rubber lugs
.
while the engine is idling
while the engine is idling
1
of the battery.