9 SHOCK ABSORBER, SWINGARM
104
–
Remove spacers
R02815-10
–
Mount special tool
Pressing tool (79629000044) (
–
Press out the heim joint by screwing in the screw.
R02816-10
–
Position the new heim joint.
–
Mount special tool
Pressing tool (79629000044) (
–
Press in the heim joint by screwing in the screw.
R02817-10
–
Mount spacers
Info
The heim joint for the shock absorber at the swingarm
is Teflon-coated. It must not be greased with grease or
with other lubricants. Lubricants dissolve the Teflon
coating, thereby drastically reducing the service life.
R02815-10
–
Position the shock absorber.
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
R02806-10
more easily.
Finishing work
–
Remove the motorcycle from the lift stand. (
2
on both sides.
3
.
p. 371)
3
.
p. 371)
2
on both sides.
1
.
M12
80 Nm (59 lbf ft)
Loctite
®
2701™
p. 12)