Changing The Heim Joint - KTM 450 EXC EU 2013 Repair Manual

9 SHOCK ABSORBER, SWINGARM
83
- Tighten screw .
Guideline
I
Screw, shock absorber adjusting ring
I
M6
15
Nm (3.7 Ibf ft)
201613-11
9_28 Challllnilhe helm Joint
Preparatory work
- Raise the motorcycle with the lift stand.
(00-
p. 12)
Main work
- Remove screw and lower the rear wheel with the swingarm as far as possible
without blocking the rear wheel. Fix the rear wheel in this position.
• Info
I
Raise the wheel slightly to make it easier to remove the screw.
- Swing back the shock absorber.
- Remove spacers on both sides.
- Remove shaft seal rings on both sides.
- Mount special tool
I
Mounting tool, heim joint (50329000044)
pr
p. 295)
- Press out the heim joint by screwing in the screw.