KTM 250 EXC TPI 2019 Repair Manual page 238

18 ENGINE
236
–
Position holding strip
The pins engage in the drilled holes.
G01322-10
–
Position the reed valve holders.
G01323-10
–
Mount screws
Info
Mount the screws at right angles to prevent damage.
–
Loosen screws
Guideline
Screw, inner mem-
brane sheets
G01324-10
Distance
–
Position the outer reed valve
The recesses are located on the right side.
G01328-10
2
.
3
and screw in all the way.
3
and tighten again.
EJOTDELTA PT ® 1 Nm (0.7 lbf ft)
35x25
A
is equal on both sides.
4
on both sides.