KTM 250 EXC TPI 2019 Repair Manual page 3

Read this repair manual carefully and thoroughly before beginning work.
INTRODUCTION
The vehicle will only be able to meet the demands placed on it if the specified service work is performed regularly
and properly.
This repair manual was written to correspond to the latest state of this model series. We reserve the right to make
changes in the interest of technical advancement without updating this repair manual at the same time.
We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop
are not specified here. It is assumed that the repair work will be performed by a fully trained mechanic.
All specifications are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right to modify or delete
technical specifications, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice
and without specifying reasons, to adapt these to local conditions, as well as to stop production of a particular
model without prior notice. KTM accepts no liability for delivery options, deviations from figures and descriptions,
misprints, and other errors. The models portrayed partly contain special equipment that does not belong to the
regular scope of supply.
© 2018 KTM Sportmotorcycle GmbH, Mattighofen Austria
All rights reserved
Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission
of the copyright owner.
ISO 9001(12 100 6061)
According to the international quality management standard ISO 9001, KTM uses quality assur-
ance processes that lead to the maximum possible quality of the products.
Issued by: TÜV Management Service
KTM Sportmotorcycle GmbH
Stallhofnerstraße 3
5230 Mattighofen, Austria
This document is valid for the following models:
250 EXC TPI EU (F7303S7)
250 EXC Six Days TPI EU (F7303S2)
250 XC‑W TPI US (F7375S4)
300 EXC TPI EU (F7403S7)
300 EXC Six Days TPI EU (F7403S2)
300 XC‑W TPI US (F7475S3)
300 XC‑W Six Days TPI US (F7475S2)
*3206345en*
3206345en
04/2018
INTRODUCTION