Honda WB20XT2 Manual page 93

dummyhead dummyhead
PUMP
MECHANICAL SEAL REPLACEMENT
Drive out the mechanical seal (1) from the inside using
the special tools.
TOOLS:
Driver (2)
Attachment, 32 x 35 mm
Apply liquid sealant (Hondabond HT or equivalent) to
the outside surface of a new mechanical seal (1).
Drive the mechanical seal until it is fully seated on the
end using the special tools.
TOOLS:
Driver (2)
Mechanical seal attachment (3) 07948-9540000
After installing, check to be sure the seal is fully seated
and is not tilted in the casing cover.
10-8
07749-0010000
07746-0010100
(1)
07749-0010000
WB20XT2•WB30XT2
(1)
(2)
(3)
(2)
(3)