dummyhead
dummyhead
GOVERNOR SYSTEM
GOVERNOR ADJUSTMENT
Loosen the nut (6 mm) (1) of the governor arm.
Turn the governor arm (2) clockwise to fully open the
carburetor throttle valve (3).
Rotate the governor arm shaft (4) as far as it will go in
the same direction the governor arm moved to open the
throttle valve.
Make sure the carburetor throttle valve is fully open.
Tighten the nut and then make sure that the clearance
is normal.
7-4
(3)
WB20XT2•WB30XT2
(2)
(4)
(1)