Honda WB20XT2 Manual page 69

dummyhead dummyhead
IGNITION SYSTEM
COOLING FAN/FLYWHEEL
REMOVAL/INSTALLATION
REMOVAL
Remove the ignition coil (page 8-3).
FLYWHEEL
REMOVAL:
Use the commercially available tool (1) to remove the flywheel.
8-4
WOODRUFF KEY
MAGNET PART
COOLING FAN
(1)
TWO-JAW PULLER
OTC1035
WB20XT2•WB30XT2
GROMMET
(WB20XT2 only)
SIDE PLATE
BOLT (6 × 22 mm)
STARTER PULLEY
NUT (14 mm)
(Threads and seating surface)
75 N·m (7.6 kgf·m, 55 lbf·ft)
REMOVAL:
Hold the flywheel (1) with a commercially
available strap wrench (2), being careful not
to damage the magnet part.
Remove the flywheel nut (14 mm) (3).
(2)
(3)
(1)