Honda WB20XT2 Manual page 52

dummyhead dummyhead
WB20XT2•WB30XT2
FUEL TANK REMOVAL/INSTALLATION
Gasoline is highly flammable and explosive. You
can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Remove the fan cover (WB30XT2 only) (page 5-2).
Place a suitable container under the carburetor.
Turn the fuel valve lever (1) to the ON position.
Loosen the drain screw (2) and drain the fuel.
When installing, route the tube properly (page 2-8).
FUEL FILLER CAP
(C type)
FUEL FILLER CAP PACKING
(C type)
CHECK:
Check for deterioration or cracks.
O-RING
FUEL TANK JOINT
2 N·m (0.2 kgf·m, 1.5 lbf·ft)
CHECK:
Check the screen of the fuel tank
joint for clogs or damage.
BOLT (6 x 29 mm)
10 N·m (1.0 kgf·m, 7 lbf·ft)
FUEL SYSTEM
FUEL FILLER CAP
(A type)
FUEL FILLER CAP PACKING
(A type)
CHECK:
Check for deterioration or cracks.
FUEL FILTER HOLDER
(A type)
FUEL TANK
NUT (6 mm) (2)
10 N·m (1.0 kgf·m, 7 lbf·ft)
FUEL TUBE
CHECK:
Check for deterioration or cracks.
6-3
(1)
(2)