Honda WB20XT2 Manual page 124

dummyhead dummyhead
WB20XT2•WB30XT2
CRANKSHAFT BEARING
Turn the inner race of the bearing with your finger and
check for play.
Replace the bearing if it is noisy or has excessive play.
CRANKSHAFT BEARING/OIL SEAL
REPLACEMENT
CRANKSHAFT BEARING
CRANKCASE SIDE/CYLINDER BARREL SIDE
Remove the oil seal and drive out the crankshaft
bearing.
Drive a new crankshaft bearing (1) until it is fully seated
on the end using the special tools.
TOOLS: WB20XT2 (62/22):
Attachment, 45 x 50 mm (2)
Pilot, 22 mm (3)
Driver (4)
TOOLS: WB30XT2 (6205):
Attachment, 52 x 55 (2)
Pilot, 25 mm (3)
Driver (4)
(4)
07946-6920100
07746-0041000
(2)
07749-0010000
07746-0010400
07746-0040600
07749-0010000
CRANKCASE
(1)
(3)
13-13